How to Driving a Howo Truck (Shitting Gears)?
Time：06-16-2021
10-Gears Transmission Shifting Manual
Gearbox Type: HW10, HW19710, HW19710T, HW13710, HW15710, HW18710
1. For all gear shifting, stepping on clutch twice. For example, firstly step on clutch to bottom, then move gear from 1st to Neutral, loose clutch; secondly step on clutch to bottom again, then move gear from Neutral to 2nd.
2. When shift from the low gear range to high gear range (5th gear to 6th gear), firstly switch the valve on lever from “L” to “H”, then step on clutch, move gear to Neutral, release clutch, then step on clutch again, move to 6th gear.
Do not perform the gear-jumping operation in low and high range shifting, like from 4th gear to 6th, or 7th to 5th gear, otherwise it will damage deputy box synchronizer.
The deputy box only switch to the range selected when the gear is at Neutral.
3. When the vehicle speed is higher than 30km/h, do not shift from high to low range gears.
12-gears Transmission Shifting Manual
Gearbox Type: HW19712, HW19712C, HW19712L, HW19712CL
1. For all gear shifting, stepping on clutch twice. For example, firstly step on clutch to bottom, then move gear from 1st to Neutral, loose clutch; secondly step on clutch to bottom again, then move gear from Neutral to 2nd.
2. When shift from the low gear range to high gear range (6th gear to 7th gear), firstly switch the valve on lever from “L” to “H”, then step on clutch, move gear to Neutral, release clutch, then step on clutch again, move to 7th gears (howo truck parts).
Do not perform the gear-jumping operation in low and high range shifting, like from 5th gear to 7th, or 8th to 6th gear, otherwise it will damage deputy box synchronizer.
The deputy box only switch to the range selected when the gear is at Neutral.
3. When the vehicle speed is higher than 30km/h, do not shift from high to low range gears.
16-gears Transmission Shifting Manual
Gearbox Type: HW19716, HW20716, HW20716, HW20716C
1. There are two Neutral positions, move the lever left or right to select range, double H mechanism would shift gear rang from 1-4 to 5-8.
2. Each gear has two conditions, low and high, like 1H & 1L, when the lever is at 1st gear position and air switch is at “H”, then the gear is 1H, when the switch is lower at “L”, then it is 1L.
Condition 1# When starting the vehicle, N to 1L, sequence is as below:
The lever is at Neutral on left position, air switch is at Low. Step on clutch to bottom, move lever to 1st gear, release clutch.
Condition 2# When moving gears up, from 1L to 1H, sequence is as below:
Move air switch on lever from L to H, then step on clutch to bottom, then release clutch. Now it is 1H.
Condition 3# When from 1H to 2L, sequence is as below:
Move air switch from H to L, then step on clutch to bottom, then gear to 2th gear position, now it is 2L.
Condition 4# When moving to upper range, from 4H to 5L, sequence is as below:
Firstly move air switch from H to L, secondly step on clutch to bottom, move lever from 4th to Neutral Left, slide it right side to Neutral Right position, release clutch. Thirdly step on clutch to bottom again, move lever to 5th gear (howo truck parts catalog pdf), release clutch.
3. When the vehicle speed is higher than 30km/h, do not shift from high to low range gears.
AMT Transmission
Gearbox Type: HW20716A
Shifting process is controled by TCU automatically(also driver send out shifting request), it can decrease fatigue strength and increase driving comfortable obviously.
In any processes of shifting, the indication sign of gear position on the instrument panel will flash.
The following information will display on the instrument:
Current operating position of gearbox.
If ▲ flashes in the process of shifting, it means Gear-Up;
If ▼ flashes, it means Gear-Down.
AMT operation state (Auto/Manual operating mode; Dynamic/Economical Mode; Climbing)
The HW20716A-series gearboxes provide two operation:
▼Auto-mode, the control is automatically completed by the control system.
▼Manual-mode,directly under the driver‘s Control.
Auto-mode (A-mode):
Manual-mode (M-mode):
In manual-mode, any of shifting actions has to be delivered by the driver, who decides the shifting moment and gear selection, but the clutch will complete the relevant actions under the system control, i.e. during the startup, shifting and stop, the clutch coupling and disengagement are performed automatically.
A/M Function selecting
The driver is able to achieve the auto/manual-mode shifting through the handle button
screen on the instrument panel will display in realtime, the current operation mode of gearbox. The operation mode defaulted by the system is the auto-mode.
The driver may switch over the gearbox operating mode anytime during the course of startup and drive.
- In the auto-mode, the operation method of manual mode shifting is given as below:
Press the button
indicates a successful shifting.
- In the manual -mode, the operation method of automode shifting is given as below:
Press the button
- Hot Products
